14′.

The Nectar Board fits into an 11′ x 15′ area although we recommend at least 13′ x 15′ to allow proper padding of your landing zone.

You can mount a Nectar board right up against a wall and no not need to leave any additional room between the external frame to the wall.

220v. If you do not have access to 200v power, contact a certified electrician.

The Nectar Board comes equipped with numerous safety features, including but not limited to, a break beam sensor at the bottom of the board, pinch point warning labels, side and top housings with brush to block pinch points, and power-loss automatic stop.

The Nectar Board is designed to be installed using concrete anchor bolts into a concrete slab after adequate concrete slab thickness is confirmed. If you are concerned about the thickness of your concrete slab flooring or want to install a Nectar Board without a concrete slab, send us a message.

The Nectar Board was not designed to be moved once constructed. In order for the Nectar Board to be safely moved after installation, it must be mostly disassembled.

Yes! Which is why we do it for you. Slats will be shipped already having the holds (when light-up holds are available)  and LEDs assembled on them.

Yes, the price is $1,700 (for domestic orders). Nectar technicians will come out to your facility and build your Nectar Board.

There will be! This will be an emphasized task for our team in the next few months while the first boards are being made. The manual will be fully comprehensive with photos and videos to guide the process.

Assembly requires basic power tools and provided drivers making it feasible for two people to assemble in one day.

The external frame of the Nectar Board is available in two heights to accommodate pad heights from 10-20 inches. We will need your desired pad height so we can get you the correct frame.

Yes. We will have a customized Nectar Climbing crash pad that is designed specifically to fit the Nectar Boards frame. For pad service for your space, send us a message.

The wall knows where the selected route starts and will automatically rotate the wall such that the starting hold is in the perfect position. 

Absolutely! This will be more applicable when the standardized hold set is available. Then, the Nectar Board may be used in “bouldering mode” through the app. In “bouldering mode”, the board will not rotate.

We believe that climbing on the Nectar Board is the safest way to climb! You rarely get more than a few feet off of the ground. Even when you top out a route, the wall will rotate you downwards so if you want a shorter fall, just hang on another second or so.

No, unfortunately not. However, we will work with you to find the best shipping option available for you.

Absolutely!

The Nectar Board is shipped in pre-assembled subassemblies. This will show up to the desired address in a palletized set of crates. Final dimensions are to-be-determined.

You will be receiving the most affordable Nectar Board possible. The promotion also conveniently breaks up payments where you buy the frame now and, if wanted, holds later.

Yes, there is a maximum of 20.

Within 100 days of installation, you can return the Nectar Board for a full refund. You will need to pay shipping. A White Glove uninstall service can be purchased (same price as the install service).

Mid-route angle changes. This feature is programmed into routes; therefore the Nectar App drives this feature.

The holds will be dual-poured or clear-base holds where the perimeter of the base is a transparent polyurethane giving a full 360° view.